Creative water features and exterior

Buy Hada gypsum boards 12mm for your ceiling and partitioning project at gypsum ceiling Supplies. We are the largest supplier of quality ceiling systems and accessories in Nairobi, Kenya

• Size: 2420mmx1210mm
• Weight: 24Kg

Buy Comply gypsum boards 9mm for your ceiling project at gypsum ceiling Supplies. We are the largest supplier of quality ceiling systems and accessories in Kenya

• Dimensions: 2400mmx1200mm
• Thickness: 9mm
• Weight: 20Kg

Gyproc? Firestop Board is a gypsum-based Interior Wall & Ceiling product used in areas where High Fire Resistance Performance is required to restrict fire from passing from one side of the wall to the other side. Gyproc? Firestop Board?s gypsum core incorporates glass fibers & other fire-resistive additives that are encased & firmly bonded to strong pink-colored paper liners Gypsum Ceiling Supplies Fire resistant Gypsum Boards in Kenya: Gypsum is approximately 21 percent by weight chemically combined water which greatly contributes to its effectiveness as a fire resistive barrier. When gypsum drywall is exposed to fire, the water is slowly released as steam, effectively retarding heat transmission. Fire-rated gypsum drywall is more fire resistant because it contains glass fiber reinforcement and other additives within its specially formulated gypsum core to help it hold up longer to fire exposure. Fire-resistant gypsum board is referred to as ?Type X? and must be third-party certified by an independent testing and listing agency to meet the fire performance requirements prescribed in the Standard Specification for Gypsum Board. Types of Fire-Resistant Gypsum Boards Type X fire-rated gypsum drywall that is 5/8 --inch (15.9mm) thick and installed on each side of nominal 2-inch x 4-inch (38x89mm) wood studs spaced 16-inch (400mm) o.c. or 3-5/8 inch (610 mm) steel studs spaced 24? o.c. has a minimum fire rating for the assembly of 1 hour, which is a typical requirement for many building codes. Type C fire-resistant gypsum board (sometimes referred to as Improved Type X) is similar in composition to Type X, except that it has more glass fiber reinforcement and other ingredients in the gypsum core that make its fire-resistive properties superior to Type X. It is available in 1/2-inch (12.7 mm) thicknesses. Fire-rated Type X Shaftliner is 1? (25.4 mm) thick and used in special Shaft wall and Area Separation Firewall assemblies. Local and Government building codes require the installation of fire-rated boards in areas such as furnaces and utility room walls for residential applications. Fire-rated drywall can also be installed in a basement or places where wood stoves might be used. This enhanced gypsum board is typically found on attached garage walls and ceilings that are adjacent to the main living area of the home. For commercial buildings, fire-rated gypsum drywall is specified for most of the building walls and ceilings to meet building code requirements for fire partitions and assemblies. These fire-rated partitions and assemblies provide life safety for the building occupants.

Gyproc filler is a gypsum-based setting material for bulk and secondary filling of plasterboard joints. A low shrinkage product for hand application, with 60 minutes working time. It can be used in stages 1 and 2 of the traditional 3-stage jointing process. Gyproc filler produces a smooth, continuous, crack-resistant lining surface ready for priming and final decoration. Several jointing specifications are available to suit the board type, site preference, and method of application. When taping and jointing, Gyproc Joint Filler is suitable for the application of the taping coat only. It sets to a hard finish and is ideal for use on plasterboard joints under Gyproc Finish Plasters Joint filling is an important process in many structures such as Buildings, Masonry Walls. A joint filler for use in joints between structural elements comprising at least one layer of a substantially non-compressible, moisture blocking material; at least two layers of a compressible and resilient, moisture-blocking material, each layer being in surface to surface contact with a layer of non-compressible material. The layers of material are combined to form a strip of interleaved compressible and non-compressible layers, and in an uncompressed state thicker than a joint

Sometimes referred to as moisture-rated drywall or moisture-proof plasterboard. Hada moisture-resistant gypsum board is a ceiling panel you can?t resist. The panel is manufactured in the size of 9mm thick with dimensions of 4 ft*8 ft. Hada moisture-resistant gypsum board is a high-quality budget-friendly gypsum board designed to repel water and moisture when installed. The plasterboard is an excellent material for interior walls and ceilings where high moisture and water infiltration are projected. Hada moisture-resistant gypsum board has been enhanced to resist the growth of mildew and mold. This includes areas with periodic, elevated humidity, moisture vapor, and dampness levels due to water usage within the space or environmental conditions nearby. Some examples in residential houses include:

• Bathrooms
• Kitchens
• Laundry Rooms
• Utility Closets
• Party Rooms
• Mechanical Spaces
• Locker/Workout Areas

Benefits of Hada Moisture Resistance Gypsum Boards

• Improved resistance to water and moisture compared to standard plasterboard
• Special green face and grey reverse side paper
• Available in tapered and square-edge

We also have professional gypsum ceiling technicians to actualize your ideal ceiling designs from single-room to multi-story units